As you can tell from the title this is a hack job. The ideal solution would be to change the subnet of addresses at location 2.Lets start with the Network Diagram http://i.imgur.com/lVyVzBt.png What I want to do is add a jumpingsumo drone to a wifi network at location1 and the little bugger has an IP address you cannot change. However it has an IP address that should reside in location2 lan. Can I add the IP address 192.168.1.2 to the location1 router on it's own interface and put a static route in to 192.168.1.1/32 to allow vlans 1, 2, and 3 to access the drone while still going to location2 lan for 192.168.1.3-254? Or is there a better way to do this?
↧