Port forwards for Hikvision cameras

I do some voluntary IT work for a club and they are getting security cameras installed. The installers want port forwards added to the Spark 2wire ADSL modem/router as follows:-

"When setting up a NVR/DVR for Remote Access you will need to forward the below ports to

the NVR/DVR:

Minimum Requirements:

Device Port 8000 TCP/UDP

RTSP Port 554 TCP/UDP

Optimum Requirements:

Device Port 8000 TCP/UDP

RTSP Port 554 TCP/UDP

Web Port 80 TCP

When setting up an IP Camera for direct Remote Access you will need to forward the below

ports to the camera:

Minimum Requirements:

Device Port 8000 TCP/UDP

8200 TCP/UDP

RTSP Port 554 TCP/UDP

Optimum Requirements:

Device Port 8000 TCP/UDP

8200 TCP/UDP

RTSP Port 554 TCP/UDP

Web Port 80 TCP"

Does any of this pose any security risk for the club's network?