I've got a Netgear router flashed with Gargoyle and have been successfully connecting onto it with both the web interface and via SSH, using PuTTY and WinSCP. However, when I tried to connect today it's not connecting. The web access is still fine, but WinSCP and PuTTY are failing. I turned on logging in WinSCP and here's what it output:2016-05-01 14:17:56.692 Opening session as main channel. 2016-05-01 14:17:56.693 Opened main channel. 2016-05-01 14:17:56.727 Started a shell/command. 2016-05-01 14:17:56.739 --------------------------------------------------------------------------. 2016-05-01 14:17:56.739 Using SCP protocol.. 2016-05-01 14:17:56.740 Doing startup conversation with host.. 2016-05-01 14:17:56.794 Skipping host startup message (if any).> 2016-05-01 14:17:56.794 echo "WinSCP: this is end-of-file:0". 2016-05-01 14:17:56.794 Server sent command exit status 1. 2016-05-01 14:17:56.794 Disconnected: All channels closed* 2016-05-01 14:17:56.861 (EFatal) **Connection has been unexpectedly closed.** Server sent command exit status 1.* 2016-05-01 14:17:56.861 Error skipping startup message. Your shell is probably incompatible with the application (BASH is recommended).It last connected fine about a week ago. In that time, I've tweaked a couple of the QoS and DHCP settings, but nothing that should affect this. And as I say, the web interface connection is working fine.Anyone have an ideas around this please?
↧