Sweet!First, I would like to thank Michael, GoWifi, and MF for hosting this giveaway. I shall make good use of it. Our house is two level and roomyish, with ethernet in most rooms. Wifi is downstairs, and works well, Airport Extreme. I work from home, and haven't got around to setting up the upstairs living room, so only my work connection is connected there, haven't got around to getting a switch for the Gaming PC, and PS4. I will use the R201 there, connected to ethernet, giving me LAN for the PC and PS4, and allowing 5Ghz upstairs, and better 2.4.Now, I need some info, and where better to ask.1. I assume I should use the same SSID/PW as the 2.4 and 5 downstairs, to allow roaming? 2. I've read, probably from here, that overlapping access points can be an issue, i.e. too much overlap. causing lack of roaming switchover. Am I wise to run the R201 at full transmit power on the to allow that to take over the roam? Or turn down the AE? (If I can, I'll need to check) Probably only an issue with 2.4.3. I will connect the R201 to wall LAN which is from the patch panel HG659b Cheers, and thanks again!
↧