Just a quick one to see if anyone has had any experience with Paradox IP enabled alarms. Have a customer who we manage the broadband for (and router obviously which is a Mikrotik). They have a paradox alarm system which they can monitor themselves through an app (or something like that).Anyway, alarm guy asks us to forward TCP 10000 to the alarm IP address. All good done. Seems to be OK for a little while. Then customer rings and says the port is "closed". To which I said, rules don't disappear haha.So I enabled logging on the nat rule, and don't see any traffic coming in on the port. The only traffic I have seen come in have been my own tests with nmap. You see quite clearly the traffic getting processed by the NAT rule. So I don't think the alarm module is communicating properly. Nmap reports the port is open and even detects the service as something called 'snet-sensor-mgmt'.Anyone had any dealings with these things and know any other tricks?
↧