In case anyone else requires this with support for newer firmware. There are couple of other threads on geekzone with FW links for older firmware. This is the latest. Big thanks to Mark from Snapper Net for supplying the details and FW 3.8.7.1This configuration and matching firmware allows the DV130 to sit in front of a firewall/router to creates a layer 2 bridge that inserts a VLAN ID of 10, then strips the VLAN tag when handing traffic back to the router.This means that the router/firewall behind the DV130 can simply operate as a PPPoE initiator, DHCP or fixed IP address (service provider dependent) without the added hassle of configuring virtual sub interfaces. Download the ZIP file with config, firmware and simple instructions from here: DV130_Bridge_VDSL_AND_ADSL_EUBA_V3.8.7.1.zip NOTE: This will bridge VDSL or Enhanced UBA ADSL circuits both of which require a VLAN ID of 10.
↧