Quantcast
Channel: Geekzone forums: LAN (ethernet/Wifi/routers/Bluetooth)
Viewing all articles
Browse latest Browse all 4221

RTA 1320 Half bridge issues

$
0
0
Have setup a half bridge between my RTA 1320 and TP Link 1043ND using GargoyleThe 1320 has IP address - 192.168.1.1 and DHCP range 192.168.1.2 - 192.168.1.254The 1043ND has IP address - 192.168.0.2 and DHCP range 192.168.0.10 - 192.168.0.254The 1320 is set to PPP IP extension with NAT turned off following the guide here http://www.ben.geek.nz/2006/11/adsl-routing-solution-in-detail/When connected to the Modem directly the internet works ok and the laptop gets assigned a public IPbut when connecting to the WAN port of the 1043ND the router is not recieving a DHCP address from the modem. I have the WAN setting set to recieve DHCP wan ip's, but it is just blank with no ip address being recieved from the modem.What is going on?Is there any other settings in Gargoyle that need to changing to work with the half bridged 1320?

Viewing all articles
Browse latest Browse all 4221

Trending Articles