Mikrotik with Bridged Spark VDSL - traceroute missing first two hops

I've got a newly configured Mikrotik (10.0.0.2/24) router connecting to a Spark VDSL connection which has been bridged. I have a wired connection to the MT and can access the internet. But I notice when I run a traceroute from the laptop it misses the first two hops as per below.

Tracing route to www.trademe.co.nz [202.162.73.2]over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms 10.0.0.22 * * * Request timed out.3 * * * Request timed out.4 9 ms 9 ms 10 ms 122.56.116.95 10 ms 10 ms 10 ms 122.56.127.2106 12 ms 11 ms 12 ms 122.56.118.387 12 ms 12 ms 19 ms 203.57.145.1358 11 ms 11 ms 12 ms 202.162.73.2

Trace complete.

Do I have something misconfigured?

I have some funky stuff happening on Wifi (Unifi AP and clients have correct IP info but can't access web) but wonder if its related to this routing issue.

Routing table is default and shows directly connected networks:

# DST-ADDRESS PREF-SRC GATEWAY DISTANCE0 ADS 0.0.0.0/0 pppoe-out1 11 ADC 10.0.0.0/24 10.0.0.2 bridge 02 ADC 125.239.206.1/32 xxx.xxx.143.212 pppoe-out1 0

Looks like it's going to be another late night...