Hi,I hoping that someone with a bit of experience with Tomato will be able to help me set up my router correctly.I'm running a NetComm ADSL modem running DHCP with an address range of 192.168.1.1/24I've just brought a Linksys V2500 router and flashed it with v1.28 Tomato.So far so good - unfortunately the DHCP for tomato is also 192.168.1.1/24 and I cannot seem to change it.Ideally I figured i could run a 192.168.2.1/24 on my Tomato router - which I plan to run Astrill VPN on.I assume to do this I must connect my ADSL modem to the WAN port of the V2500 and let the V2500 act as a DHCP server for my network?Either way I havent been able to work out how to change the damn LAN settings without getting a "Invalid IP address or subnet mask (conflicts/overlaps with another LAN bridge)" errorPerhaps I'm missing something here - how do I change the IP address for the V2500 as it's obviously conflicting with my ADSL modem.By the way - I also tried configuring my ADSL modem's DHCP to be 10.1.1.0/24 but it wouldnt have a bar of it.Any help would be much appreciated.CheersMark.
↧