I am trying to set up a TP-Link TD-W8960N modem/router as an access point. I understand that I have to set the IP address to the same range as the main router which is 10.1.1.1 and the TP Link is 192.168.1.1 so I am attempting to change that to 10.1.1.114 and to turn off DHCP.I have the TP-Link connected to the laptop by ethernet at this stage.When I access the modem at 192.168.1.1 and change the ip address to 10.1.1.114, after clicking on "save" a window pops up saying " Routers new IP address is 10.1.1.114 Please confirm your PC's IP address is right!"If I now click on OK the browser (Chrome) just circles away not connecting to anything and the modem is not reachable at 10.1.1.114 or 192.168.1.1, the only thing I can do is press the reset switch.Any suggestions?
↧