I couldn't find a 2Talk forum so have posted this here - hope that's okay.I have a client who has been running a Draytek 120 in bridge mode with a Mikrotik behind it. This was on a shared Xtra Adsl connection in the shared premises they are in. They have had their own Adsl circuit provisioned now from 2Talk and I am having issues getting everything to work again.They are an NZ arm of an Aussie firm and they are running Voip phones registered back to a Pabx in Aussie. The Mikrotik was basically doing some client segmentation, basic filtering, traffic marking/queuing and SIP fixup.After moving the gear over and changing the PPPoE details on the Mikrotik it initially looked like it was working okay, could ping everywhere no issues and the phones registered okay and we could make calls.As soon as I tried to browse, no go. Can ping the addresses so DNS is working okay but no go on the http or https. The only address I can reliably get to is the 2Talk website but if I attempt to load the 2Talk support page which is https it fails to load.I reset the Draytek and used it as a standard NAT router with PPPoA and no issues, can browse fine. Removed all the config off the Mikrotik so it's only doing PPPoE and NAT and issue remains.Not sure where to go to from here...... Any help or suggestions gratefully received.CheersMatt.
↧