HiI just had a new DSL connection set up with Orcon, and they've sent me their Orcon branded Netcomm NF4V router.I want to extract the Orcon Genius password from the router, but to do so I need Telnet access into the router.It looks like Orcon have disabled this option, as there is no telnet option under Services in Access Control.I understand Orcon don't supply this password as it contravenes their T&C.Does anyone know if I can update to the vanilla Netcomm firmware, and not lose the password information in the process?Cheers
↧
Orcon NF4V router - no telnet option, and using vanilla firmware
↧
Help with port forwarding problem
Hello I'm not really computer savvy when it comes to routers and such but this problem has been doing my head in for quite a while now.. I was hoping someone who is knowledgeable on this subject might be able to help or maybe point me in the right direction(sorry if I posted this in the wrong place).Okay so really quickly from the beginning.. I play an MMO called Elder Scrolls Online on PC. I've played it for almost 3 years and my latency has always been at a stable 200 ping. In the past few months however, it now stays at a constant 350+ ping. I referred to the games manual on latency issues and it suggested I open some ports. I've tried port forwarding the requested ports and checking to see if they're Open at portchecktool.com but it gives me an error saying 'Connection timed out'. When I tried disabling the firewall/windows defender the error then switched to 'Connection refused'. Sometimes port 80 would say it's Open but the rest of the ports would still give me 'Conneciton timed out'. My ISP is Slingshot and I am on VDSL. The router is a TP-Link TD-W9970 V1.0. OS is windows 10.If there is anything more you'd like to know just ask and I'll be happy to give as much information as I can.. thanks
↧
↧
VPNFilter virus
Just read about THIS.Any news or comments?
↧
Asus AC66U, any issues?
Looks like a good value device for UFB.Most big sites are giving it 8-8.5/10.Anything I should be concerned about with the device?https://www.asus.com/nz/Networking/RTAC66U/[Mod: Murph - Moved to correct subforum]
↧
Linking multiple network switches together
HiWe've got a house that was networked cabled before we moved in and the way it has been done is basically 3 Cat6 cables running back to a central point in the garage.Cable 1 goes to lounge area (Left side of house)Cable 2 goes to study (centre of house)Cable 3 goes to master bedroom (Right side of house)Can I plug network switches into each location to service multiple devices for those areas? a rough mock up of what I'm trying to achieve. Is the switch going to the router overkill? seeing as its a 4 port router can I just run all 3 back to the router?
↧
↧
QNAP not responding
Couple of days ago my QNAP TS-451+ NAS stopped responding.After giving it a reboot the Status red light stays on solid red and the HDD lights are solid green (in its current state the drives don't even start spinning as the NAS hasn't started them).Via the QFinderPro app it discovers the NAS but the name has been reset and the IP is now DHCP (it was a static address). I can't web browse to the NAS using its new IP address nor can I log in with my admin logon or my own (admin account). I have done the reset at the back but it boots back into its current state. Anyone see this before? Naturally I want to keep the data on the HDDs but it seems a NAS issue currently.
↧
IPv6 on the PPPOE interface of an Edgerouter
When I setup my shinny new Ubiquiti Edgerouter 4 last week, I only set it up for PPPOE using IP4 to BigPipe. Since they're shutting down their IPv6 trial I didn't think it would make sense to have a go at using IPv6.Anyway, every second I see it logging:pppd[1849]: Unsupported protocol 'IPv6 Control Protocol' (0x8057) receivedAlas, I'm still learning this router's "ways", and I can't figure out how to get it to do something more constructive than just repeating itself. Perhaps it will go away when Bigpipe finally turn off IPv6, but I'm wondering if there is something I can do to make the router happier.
↧
HOW TO: Set up a Mikrotik RB951G-2HnD for UFB
As a few people have requested here is a how-to for setting up a Mikrotik RB951G-2HnD for use with UFB (in my case, Spark UFB) and a DNS unblocking service. The Mikrotik RB951G-2HnD is simply put, a very good router with tonnes of features and best of all is available for sub $150.First of all I am going to assume you know how to set up your computer with a static IP (192.168.88.5) and have Winbox already (available by browsing to your router) and have connected to your router by entering it's IP (192.168.88.1) and logging in. If you're using OSX or Linux then either use WINE to run the Winbox application or try and follow along with the web interface.First - a little bit of housekeeping:When you pull your router out of its box and plug it in it will not have the latest firmware - lets upgrade this at the very start to avoid any problems. Head over to http://mikrotik.com/downloads and download the latest mipsbe package.Next, in Winbox go to Files and drag / drop the file into the file manager, you can simply reboot your Mikrotik now by going to System > Reboot. Once it is all loaded up again (indicated by 2 beeps) login and go to System > Routerboard and press Upgrade to upgrade the Mikrotik's bootloader, do another reboot and you're set for the next step.Next - getting to the basics:I am not going to fully reset my Mikrotik whilst my partner is watching "Short of talant" street via the Chromecast as I've found out she gets rather angry when I do that, instead the below screenshots serve more as examples to what you're trying to achieve.When you first login to Winbox for the first time you'll get greeted by the Quick Start screen- it looks like this. To make things simple we'll use this to set up the initial configuration, fill it in as shown:Green Area: Set up your Wireless Network specifics.Red Area: Set your providers PPPoE settings here.Orange Area: You don't need to worry about this too much unless if you really wanted to set your network away from the 192.168.88.1 range, lets just leave it for now for ease of setup but tick NAT and DHCP because you might want this.Below this is somewhere you can change your default password - do this, do this now otherwise your router will get owned.Once you've hit Apply the rest is pretty straight forward to do.VLAN Tagging:I've noticed that due to a bug in Winbox this pretty-much breaks the Quick Setup screen, so make sure you've completed the basic configuration of your router first. Go across to Interfaces on the left and you'll be greeted with a screen that looks like this:If you go to VLAN you'll be presented with an empty screen, hit the + button and copy what you see in the image below:Once you hit OK you should actually have internet once you set up your computer with DHCP, but lets not stop there... Gotta secure this thing.Security - Firewall:I really hope you changed the default password!Right, you've got internet but by default all your ports will be open - a very suboptimal situation!Fix this by going to IP > Firewall, the default rules are sufficient for your basic setup but you might want to assign some interfaces to them! Nevermind, by double-clicking on the rules you're greeted by a page that allows you to set the IN and OUT interfaces for that rule to work off - just follow what I have set up here:Now if your rules match my image lets test this! Go across to GRC SheildsUP here: https://www.grc.com/shieldsup and run a port scan on your IP, you should get all green across the board.Free Dynamic DNS baked right in:All you need to do to enable this is click on IP > Cloud from the left menu. Click on Enabled and Update Time. Your DNS name is what you're able to use as Dynamic DNS for providers like dns4me or UnoTelly to keep your IP always updated with them.Time Zone and Clock:Assuming you hit Update Time above you might want to set your time zone, to do so go to System > Clock and change the Time Zone to your zone of choice.DNS:Yeah, you want to use your content unblockers services right? Easy, first of all you'll need to go to Interfaces from the left panel and double-click on PPPoE-Out to edit the rule - the rule we need to change here is under Dial Out and is called "Use Peer DNS" - unticking this box ensures your Mikrotik won't use your ISP's automatically assigned DNS servers.Once you've done this go to IP > DNS and press the up arrow (^) on any DNS servers there, then fill in the top 2 DNS servers from your provider of choice and hit Apply:I've found setting your cache to 1mb is not too bad but some people like to set this as greater to speed up DNS responses - up-to 10mb is fine for your home network.Now, go to Cache and Flush Cache to clear anything off that isn't supposed to be there.Other things:If you own a Chromecast or anything that gets angry due to Google DNS not unblocking Netflix this simple thing could save you a little of time - in the Firewall screen go across to NAT and add 2 new rules (since Android has been logged to use TCP):Chain: DSTNATProtocol: UDPDST PORT: 53Chain: DSTNATProtocol: TCPDST PORT: 53Then click on Action and drop down Action to Redirect. This will ensure no matter what DNS devices on your network use your router will capture and forward these requests to the unblocking service of your choice.---If you own an Xbox or PS4 or do online gaming and / or torrent downloading you might want to enable UPnP so your devices can automatically forward ports but bare in mind this can pose as a risk since your devices can now port-forward on demand.To enable this go into IP > UPnP and click on Enabled and de-select "Show Dummy Rule" and "Allow to Disable external interface" - go into Interfaces and set your Bridge interface as internal, and your PPPoE interface as External as shown:Common Problems:With some Apple devices you might run into some difficulties with connecting to WiFi - it is a simple fix here involved by going into Wireless (from the left), double-clicking on wlan1, hit Advanced Mode on the right of the box that pops up, go to the Advanced tab and change Preamble Mode to either Long or Both.Other Information:There is a heap of information on http://wiki.mikrotik.com - look up, use Google and if you can't find what you're looking for then post on Geekzone for help and I am sure somebody can help you out.If people are interested I can post other things here (like setting up traffic queues), but if you've just bought a Mikrotik give this guide a go and let me know how you get on. By following this guide you're going to get your Mikrotik working as your main router with full service unblocking support.
↧
Where in NZ can I buy a CAT 7 certified cable?
I've checked Mightyape and PB Tech online store and cannot find any CAT 7 certified ethernet cables..Though, in the US and other countires, everyone is talking about having CAT 7 cables..
↧
↧
Mesh network products for work colleague - what works out of the box?
Friend at work has just got fibre connected, and now finds his wireless hasn't changed speed. More than likely crappy coverage/capped wifi speeds.I don't think he'd be up for a Unifi type wired system, and that one of the off the shelf mesh solutions are probably the best best.Ie Google wifi. https://www.geekzone.co.nz/forums.asp?forumid=66&topicid=217913&page_no=2Now do these work as the entire network, ie the Google Wifi, I believe works best when it's the router and APs, but at launch didn't have the Vlan tagging for fibre (he's Slingshot if that makes a difference). Do any of the others?
↧
Segregation of power and data cables in wall
We're currently in the process of renovating, and have had the electrician install a few additional power sockets before putting on the wall linings. I'm installing data outlets alongside in a few locations. One issue has arisen where the electrician has run his wiring horizontally along the wall through a number of studs, which cuts across spaces where I plan to install data outlets. I've asked for that run to be relocated to under the floor, which is straightforward and they have agreed to do. But, they don't believe it's necessary and our contracted builder has asked me to produce the material citing this requirement. If I was to install the data cabling with things as they are currently, it would be in direct contact with the electrical wiring in the bottom of the wall. I have been working to the TCF Premises Wiring Installer Guidelines, which is where I have taken the requirements for the separation of power and data cabling. The TCF Guidelines refer to the separation requirements under AS/NZS 3000 ("The Australian/New Zealand Wiring Rules"), which is incorporated by reference into the Electricity (Safety) Regulations 2010. I've seen in this old thread that those requirements then themselves incorporate Telecom's PTC 106 by reference, which contains much the same requirements, but is quite old.AS/NZS 3000:2007 costs a reasonable amount, and I'm not keen to purchase a copy just for the sake of this minor issue. Is anyone with experience in this area able to confirm the current requirements around power and data separation, and what is generally considered acceptable practice?
↧
Do these usb add on dual band AC antennas work?
Just curiosity. Ive got a NF4V which is stuck with single band and AC. Ive seen these on trademe. Clearly I can buy H659 router for $15-30 due to the number of vodafone installs.But just curious if I could turn my old router into a dual band AC, OR use it as a repeater which could be placed in the one area that 5ghz may struggle. https://www.trademe.co.nz/computers/networking-modems/wireless-networking/adaptors/auction-1649510313.htm?rsqid=a4b77eee77614015aeae746f7813b31c
↧
Help! My first go on wireless AP
OK, got a Cambium e410 wireless AP (free to test).I've connected, light is blue and portal says 'onboarded'.But where do I go from here?Sorry, I'm completely new to AP's.Am I using the AP to connect to the internet or do I still use the wireless router?Do I use the WiFi from both?Does the AP have a different SSID to the router?I know, lots of stupid questions, but I find that the manual doesn't contain a lot of info.
↧
↧
New router confirms AC 5Ghz improvement, but range extension needed?
Ok so I chucked in the HG659, indeed the speed a remarkably better in close proximity.I put an AC receiver USB chip on the notebook, it helped a bit.But I need to extend the range.Outside the room is the long corridor which is in line of sight of the router. It has a power point. If I placed an access point or range extender there, it is in line of sight of the bedroom. Would this be the best course of action? If so what type of range extender should I consider?I read this article http://au.pcmag.com/d-link-wi-fi-dual-band-range-extender-dap-1650/47829/guide/the-best-wireless-range-extenders-of-2018
↧
Ubiquiti Edge Router Suitability and Network Structure Q
Hi All,Have no idea about any networking, structured cabling, router/modem functions etc. so please bear with me, but have found some good threads with great information (however nothing that has been able to answer my queries unfortunately). I have a 300sqm house on a 2,000sqm section and looking to get solid Wi-Fi coverage across the entire house, and ideally into outdoor living areas if possible. Currently on Spark broadband/fibre, with fibre patch lead running to a Huawei router/modem in garage distribution board, that then feeds into structured cabling (phone terminal that has been converted to a single RJ45 outlet), that then has the standard Spark supplied Huawei HG659B router/modem inside the house, photo of set up below:I have purchased 2 x Unifi AP AC Lite's, and may extend this with another 1 or 2 in the future depending on how coverage works out. I am looking at the EdgeRouter ER-X-SFP which would have the capability to run the 2 x AP Lite's and have provision for future expansion.Now my question is can I do away with the Huawei modem/router that is in the garage, run the fibre patch lead directly into the SFP port on the Edge, with the PoE ports then powering the AP Lite's that then provide Wi-Fi throughout the house? Or do I need to retain either one of the two existing Huawei Modem/Router's? I'm not sure which is which, and what functions they provide? If I need to retain one of the Huawei products how does the EdgeRouter ER-X-SFP link back to the network? Just through one of the ethernet ports from the WAN on the Huawei? Sorry if this is a really stupid question, however I've done some research and haven't been able to come up with an answer, just need some help with how the structure actually needs to work. Thanks in advance.BT
↧
AirNZ AKL Int Koru Lounge DNS Change required.
Hi All,I travel frequently and have notice that to get wifi in the AKL Int Koru club I have to disable my DNS4me DNS address and accept to have the assigned automatically option... (otherwise NO internet)..Is there another solution to this 1st world problem or will I just have to put up with changing it or using a DNS changer. If thats the solution which is the best one.Cheers (& Thanks in advance) Kevin
↧
VPN - beginner advice
Not sure if this the right forum for my topic, so happy for a mod to move it if necessary.I've recently decided that I (and my household) need to better with my digital/online security, and one of those areas is (potentially) a VPN. I've been giving it some thought over the weekend, but wanted to check a few things here first.I guess the key question is what do I need a VPN for? Most of my (and my wife's) online activity takes place at home over wifi or ethernet, on our smartphones over a mobile data connection when we're away from home, or at work-based wifi. My wife sometimes uses public wifi at the library. I rarely use public wifi, but there are occasions (like last week) when I do use public wifi which is what prompted me to think about VPNs.The way I see it, there are a few use-case scenarios:1. Browsing over a public wifi connection away from home on a mobile device.2. Browsing over the cellphone data network.3. Browsing at work on my employer's wifi network.4. Browsing at home on my home network.Is it reasonable to infer that my browsing on my home network is generally "secure" (insofar as any home network is secure), as browsing on my mobile data network, but that the other two scenarios may be less secure? To me, this would suggest that I don't need a VPN at home, or if I'm just using my mobile data connection on my phone. I'm not especially paranoid about snooping by the ISP, so I don't really think I need a VPN in those situations. I should also add that I'm really thinking of a VPN for a unblocking geoblocked content. I already use a geounblocker which I'm happy with, but I'm aware that a VPN can also help with geounblocking, so that's why I'm including the browsing at home aspect in my considerations.For the work wifi, I'm not particularly paranoid there, but I was considering whether an employer that provided wifi would prohibit a VPN, as it hides what content is being accessed. Is this likely or common? I know I can ask my employer, but I'm curious whether this is generally accepted that a VPN can't be used on the work wifi.For the public wifi, a VPN seems a no-brainer. Thinking through the whole thing, it seems to make sense that I should have a VPN for accessing public wifi, but possibly don't need it (or won't be able to use it) for the other scenarios.Then there's another aspect which I was wondering about. For most of my thinking I've been envisaging a VPN managing data flowing to and from my device to an external endpoint, but I'm aware some people use a VPN to route access to their home network. I don't really understand how this works though. I get the impression that you need to run software on your router, and that what you're doing is connecting via a VPN to your home network, and then everything runs from there. Is that a better overall solution?It's all a bit messy, because I'm not really sure what I need, and how it would work. There's also the question of which VPN providers are worth spending money on, or whether I need new or additional hardware. Is there a reliable guide to VPNs I can read? I've googled a little, but I mostly seem to be getting myself more confused.
↧
↧
ONT & connecting to a Router AND home data port help.
Hey all,So I recently purchase a new Fletcher Living home and I'm scratching my head on how to get my data ports working throughout the house.I've got the yellow cable running to my R8500 and the WiFi & Internet access is working great.However when I plug any PC into the data cables referenced nothing happens (even if I plug the cables in the Data Module into the Router, or directly into the ONT.Would appreciate any thoughts :)See below for the Network Box Setup: https://imgur.com/a/UPsgdKz - Album with close ups
↧
Variation in Router speeds with ultra fast broadband & ont
I have just had fibre ultra fast 900/500 installed which is great (slingshot), I was originally on VDSL with a Netgear D7000 V1, so switched this over to WAN only. worked great, was getting 700-800mpbs down approx 400 up. I was under the impression that the router did not determine download speed but the ont did, well my Son wanted my box for his place so decided to give him mine & purchased a Netgear R7000P, well that slowed my download & upload down to a measley 300/200, swapped back to D7000, up it came again. I returned the R7000P & decide to splash out on the netgear D8500 (even though didnt need modem side). This time my speeds were consistent 500/200 which was better but though should be faster. So borrowed my sons genuine slingshot router (with crappy wifi) & back again to 800/400. Why are there so much inconsistency with various models, is there a hidden setting effecting the compatabilty with the ont? Does it have something to do with the way the vlan tagging is setup in each box? Using same speedtest with 5 minutes of each test so no fluctuations thereAny ideas appreciated, sick of throwing money at the issue, seems to get worse with more money. thanks
↧
Spark hg659b - Can't Forward port 1701
Hi thereI am trying to set up a VPN server on my Synology NAS using L2TP/IPSec. Apparently to get this to work I need to forward ports 1701, 500, and 4500 (UDP)The HG659B refuses to allow me to forward port 1701. "The external port cannot be 7547,514,68,53,546,500,1701,8443,8080,990,5060,28090,50000-50020."(Note the error message also mentions 500, but this can be forwarded with a built-in mapping). Couple of questions: 1) Any idea why? 2) Any way around it?There are no options to change the ports being used in the VPN Server settings. Thanks!Brett
↧