Can't get port forwarding work on edgerouter
Hi GuysI have installed my edgerouter lite and it has fibre internet access now.Now I am trying to run HTTP server to host some website but I can't get port forwarding work..My setting is as below. I...
View ArticleAV1200 Powerline (TL-PA8010) - some info needed
G'day all,Have been researching powerlines and right now, I'm erring toward the AV1200 passthrough.I'm hoping a few of you out there may have this kit and can answer a couple of questions I have..How...
View ArticleCambium E400 40MHz Channel issues
Is anyone else having issues with the 40MHz channels on the 2.4GHz band on the E400?I manually set the channel in the configuration to channel 11, save the setting and reboot. Then using INSSIDER i can...
View ArticleDNS server: PTR record?
Anyone here handy with DNS server installs? I have a Synology Diskstation setup with a mail server and I have my domain hosted Domains4Less and pointing to my static IP provided by my ISP. Mail works...
View ArticleSlow ADSL speeds (30MB/s) in garage via ethernet cable with fibre (200MB/s)...
I've got fibre in my house on a Huawei HG659 router and get 200MB/s over ethernet and 160MB/s over WiFi.I've renovated our garage into an office and got my sparky to lay an ethernet cable from the...
View ArticleCabling my new house?
Hi all,I'm looking to buy 4 boxes of ethernet 6A cabling to wire my house up. I'm new to NZ so not familiar with the various places to source this. Can anyone offer any recommendations or is it worth...
View ArticleWhich cat6 cable to buy?
Which cat6 cable to buy?this one from jaycar for ~$50https://www.jaycar.co.nz/cat6a-patch-lead-30m/p/YN8299Or this one from Trademe for...
View ArticleHome network question
Hi,I have a new-ish home, but the company that built it only went part way down the fibre ready route. I only have one RJ45 port in 4 locations, which doesn't seem anywhere near enough. No idea what...
View Articleauto-reconnect feature for powerline comms ethernet bridge
Hi,Simple question - does anyone have recommendations for a powerline comms (ethernet bridge) device that will automatically check its own connection and if it is lost (not due to unplugging the device...
View ArticleHow long does your EdgeRouter Lite take to boot?
Mine takes about 10 minutes! Takes ages on the loading configuration bit.I do have zone based FW set up with 6 zones but the rule sets are pretty light. Most of them are just accept established/related.
View ArticleHG630b Strange DHCP behaviour
Hi all, I have just been doing some long needed sysadmin on my home network and thought it might be a good idea to reduce the DHCP allocation range from the default end 192.168.1.254 to 192.168.1.199....
View ArticleAsus RT-N56U no lan
Having recently changed to spark fibre we are having even more problems with peak time traffic than we did on ADSL. A little research shows the Huawei H659B does not do wifi very well, atleast not...
View ArticleNew Router+Modem on Orcon Genuis
I am currently with Orcon for my ISP and on the Genius White plan with the Netcomm NF4V Modem+Router supplied by Orcon. The WiFi has been absolute crap and I have been wanting to buy a 3rd party...
View ArticleHow to get higher WiFi speeds out in garage/man cave
I'm on 1Gbps fibre with a Huawei HG659 modem in my house. I have a Cat 6 cable running under the house to my garage so I can get similar speeds in my garage, but only over ethernet.I want to get high...
View ArticleLAN speed confusion
Possible the dumbest question ever/noob blindness, but here I go nonetheless...I'm a little confused by the supposed speeds I'm getting with the LAN Speed Test utility when sending a 90MB test file to...
View ArticleRouter setup for new house
I might be moving into a new house soon (unconfirmed as of yet, but will want to get advice so I can immediately start as soon as I move).It is already built, with ONT in that distribution box inside...
View ArticleHome Networking Cabinet/Enclosure Recommendations?
Wondering what everyone else is using for a small home networking cabinet. Ideally it will be surface mounted and have an 8 port patch panel and room to fit the following.Unifi 8 port poe switchUnifi...
View ArticleHome ONT wiring query
Just a quick question as I'm not sure myself, at home we have our ONT in the garage(back of property) and a 8 port patch panel. We want all ports active to take advantage of wired gigabit speeds etc(no...
View ArticleSetting up guest WiFi on Cambium E400 and preventing access to LAN
Hi, I recently purchased a cambium E400 WAP which I am using in combination with a DrayTek 2760Vn modem/router. I am trying to set up a guest network that allows access to the internet only and am...
View ArticleIsolating a guest VLAN using a Mikrotik 750GL
I am not networking expert but I have spent a bit of time configuring my Mikrotik and have it doing most of the things I want.I have just upgraded to a smart switch and now have a series of VLANs for...
View Article